Skip to content
4U MACHININGPrecision. From prototype to production.
MANUFACTURING INSIGHTS

Fitting Tolerance Guide | 4U Machining

May 15, 2025

At 4U Machining, precision and consistency are the cornerstones of our machining services. One of the most crucial factors that determine part quality and assembly performance is fitting tolerance. Whether you’re working on a tight slip fit for shafts and housings, or a loose clearance fit for easy disassembly, understanding fitting tolerances is key to achieving your design goals.

We follow international standards such as ISO 286, ANSI B4.1, and DIN standards to deliver parts with precise dimensional control for CNC machining, turning, and custom fabrication projects.


πŸ“ What Is Fitting Tolerance?

Fitting tolerance is the permissible range of variation between mating parts (e.g., holes and shafts) that allows them to function together as intended. It defines whether a fit is loose, tight, or interference-based.

Fitting tolerances are critical in mechanical assemblies involving:

  • Bearings and housings
  • Shafts and bushings
  • Gears and shafts
  • Sleeves and pins
  • Custom mechanical fasteners

πŸ” Common Fit Types in Machining

Fit TypeDescriptionApplication Examples
Clearance FitAlways leaves a gap; easy assembly/disassemblyPulleys, guides, tool holders
Transition FitMay have slight interference or clearance; moderate gripGear hubs, wheels on axles
Interference FitAlways tight; parts are press-fittedBearings, press-fit dowels, permanent joints

πŸ“Š Standard Hole & Shaft Tolerance Table (ISO 286)

Fit TypeISO SymbolHole Tolerance (mm)Shaft Tolerance (mm)Typical Fit Range
Loose ClearanceH7/g6H7 (0 / +0.021)g6 (–0.007 / –0.020)0.007 – 0.041 mm
Sliding FitH7/f7H7 (0 / +0.021)f7 (–0.016 / –0.034)0.016 – 0.055 mm
Close Running FitH7/e7H7 (0 / +0.021)e7 (–0.025 / –0.043)0.025 – 0.064 mm
Transition FitH7/k6H7 (0 / +0.021)k6 (+0.002 / +0.011)–0.002 – 0.019 mm
Light InterferenceH7/p6H7 (0 / +0.021)p6 (+0.029 / +0.040)–0.008 – –0.019 mm
Medium InterferenceH7/s6H7 (0 / +0.021)s6 (+0.050 / +0.062)–0.029 – –0.041 mm

Note: Tolerances are examples based on 50 mm nominal diameter.


βš™οΈ Our CNC Machining Tolerance Capabilities

At 4U Machining, our advanced 5-axis, 4-axis, and 3-axis CNC machines achieve precision tolerances as tight as:

  • Β±0.005 mm for tight tolerance fits
  • Β±0.01 mm for functional parts
  • Β±0.02 mm for standard production tolerances

All tolerances are measured using calibrated CMM, micrometers, and digital gauges to ensure repeatable precision.


🌐 Standards We Follow

We machine to global fit tolerance systems, including:

  • ISO 286-1 & 286-2: Geometrical tolerancing system (hole-basis & shaft-basis)
  • DIN ISO 286: German adaptation of ISO fit system
  • ANSI B4.1: Preferred U.S. tolerance system for fits
  • JIS B 0401: Japanese Industrial Standard for limits & fits

🏭 Industries That Require Tight Fitting Tolerances

IndustryExamples Where Fits Are Critical
AutomotiveBearings, gear shafts, steering assemblies
AerospaceHydraulic parts, flight control systems
Medical DevicesProsthetics, implantable mechanical systems
RoboticsPrecision arm joints, servo motor housings
Industrial EquipmentShafts, gears, press-fit couplings

πŸ”§ Tolerance Recommendation for Mating Parts

Fit PurposeHole Basis Fit SymbolUse Case
Free MovementH9/d9Guide pins, moveable fixtures
Easy Sliding FitH8/f7Shafts in bearings
Snug AssemblyH7/k6Gear hubs
Press-Fit or Force-FitH7/p6 or H7/s6Permanently joined parts

🧠 Design Tips for Specifying Fits

  • Always specify the nominal size and tolerance range in drawings.
  • Use Hole-basis system for standardized tooling.
  • Include surface finish (e.g., Ra 0.8 ΞΌm) when needed.
  • Tighter fits may increase machining costβ€”opt for tight fits only where functionally necessary.

πŸ›  Example Application

A customer requested a transition fit for a 20 mm shaft in a bearing housing. Using ISO H7/k6, we delivered parts with a controlled interference of 0.005 mm to ensure perfect press-fit assembly and long-term durabilityβ€”no post-machining adjustment required.

Leave a Reply

Your email address will not be published. Required fields are marked *

COOKIES & VIDEOS

Manufacturing videos load automatically. This notice does not control video playback or grant permission for analytics or advertising.

4U MACHINING

Have a machining project? Talk to us on WhatsApp.

Start WhatsApp Chat +86 181 2296 9278
Opens WhatsApp. Send the message there to start your conversation.